Fast shipping and well packaged. Brighter than standard bulbs. No instructions on orientation of bulbs. Led chips need to be aligned horizontally to provide proper light distribution. Have to see how long they last.
These are entirely splendid. They put a huge amount of light out and about. They create a truly sharp low bar cutoff that nearly looks like the halogen design. The high bar is splendid and goes a long separation, yet isn’t exactly as spotless of an example as a halogen. I just gave 4 stars on the grounds that these entirely should be balanced. At the point when contrasted with a halogen globule, the ‘blocker’ for the low shaft is really at an altogether different edge than the halogen knob. When i initially introduced them, i saw that the bar edge was somewhat off-really higher on the left than the right. I was effortlessly ready to just contort them counter clockwise (from the back) to amend the edge of the bar. They ought to be keyed appropriately so when contorted into the bolted position they are right and won’t require change.
Well, these are pretty good (but not great) led lamp replacements. They have the correct size/structure for being h11 replacements, but the ‘plug-n-play’ wiring connector needs work. And the light pattern needs work. Wiring connector – most times, these usually just connect one way only – there is often a notch or a bit of plastic in the connector that lines up with the stock factory connector and clicks in snug. This light comes without a definite way to install – so you can plug it in either polarity – so when plugged in one direction, the power flows – the other, it doesn’t. Also, the connector never ‘clicks’ into place. So it’s never a solid lock of a connection. Light pattern – the light pattern is a bit less focused than other led lamps i’ve used. These have a ‘hot spot’ focus center, but no definitive cut off.
You can see the difference with my dog lights. That was the color of precious ones. We have to install next 😍😍 i’m highly satisfied.
New led bulb vs oem halogen in picture.
It looks smooth and is bright as heck. It is easy to mount and install. I have had about 7 different kinds of lights and this one is hands down the best. If you buy this bar i can tell you with unequivocal certainty that you will be not be disappointed.
- Great quality and highly satisfied
- Thoughtful Quality
They’re far superior to standard bulbs both in the way you install them and their performance. The quality of the light is spot on. Not too bright and not too dim, the color of natural clear light – not blue nor amber. I beleive they are brighter than my stock bulbs, but they’re not annoyingly bright. I haven’t had anyone flash their high beams at me in protest. I think the high beams could be a little brighter. Also, because the low current draw, my highbeam indicator on my dash doesn’t turn on when i use high beams. I’ve actually accidently driven past people with my highbeams on without having someone flash their highbeams at me. There’s something about the quality of this light that seems to be easier on approaching cars eyesight.
If u want to go from boring to cool its a very cheap way to do it with this kit i have mines install on my mustang 2009 and what can i say i love em 😍😍😍.
I like the color temperature it produces (white color). So far it’s works great and is much brighter than the halogen bulbs i had in there before. For $20 it’s a great deal imo. Only time can tell, and i will update if and when it fells. Giving it 5 star for good pricing and that it’s working.
I’m disappointed in the light output and the pastern is not casted the same as the original halogen bulb. Depends on how it’s rotated it can blind the oncoming traffic. Also the road is actually little dimmer vs 55w halogen because the pastern is spoty and light power is same for those spots vs the whole area per halogen bulb. Maybe i’ll use them somewhere , or not. I forgot to take pictures, but i can at later time.
Wow for the prices it’s very very good. I had just regular headlight bulbs. Read lots of review and went with it. The set up was very quick and easy. I run an high end hid kit for my low beans. So i really never use high ones. But i wanted it to match the new lighting system. Got it very quick thinking about getting ones for my atv.
Features of H1 LED Headlight Bulbs Hi/Lo Beam Conversion Kit, Autofeel S9 series Super Bright 12xCSP chips LED Automotive Headlamp 6000K Xenon White (2 Pack)
- Make sure this fits
by entering your model number.
- 【NEW DESIGN】Simple design to reduce failure rate. The new light body structure design, increasing the light shape of aggregation.new imported chip beads fully upgraded, greatly improve illumination, can provide high-definition vision, powerful brightness allows you to drive more safely;
- 【AVIATION ALUMINUM】The overall use of custom-made of aviation aluminum alloy stamping, high temperature, anti-oxidation, anti-corrosion;
- 【COB CHIPS】Using a new generation of imported chips, colorless decline, instant response; penetrating power, no fear of rain and fog. Over 50,000 hours lift time;
- 【SAFE AND SECURE】Built-in drive can be instantly activated, compared to the dim halogen lamp need start xenon lamp 3-4 seconds, our LED headlamps can be instantly highlighted in response to a variety of unexpected situations, such as suddenly into the tunnel rain and fog. etc., so traffic Safe and secure;
- 【EASY INSTALLATION】Can be installed in 10 mins. plug and play. These bulbs are CanBUS-Ready and will work with most vehicle’s computer system without error. IF YOU ARE NOT SURE WHETHER THE RIGHT, PLEASE CONTACT US BEFORE PURCHASE. IF THERE ARE ANY PROBLEMS WITH THE PRODUCT, PLEASE CONTACT US IN TIME AND WE WILL PROVIDE YOU WITH THE BEST SERVICE.WE OFFER 1 YEAR WARRANTY AND LIFETIME SUPPORT.
Make sure this fits
by entering your model number.
So far so good the bulbs were easy to install and have worked flawless since it’s been a little over 3 weeks and no issues at all they look great in my mission rogue a lot better then the stock ones did they almost match the stock daytime running lights but are close enough that when they are in it’s no big deal at all.
No instructions provided, but mounting it is straight forward. The wiring is odd, as you switch ground between the black and white wires to change between white and amber illumination. This bar is very bright, especially when the white setting is used. I read horrible reviews on the recommended switch unit that has a rf remote to switch between white and amber, as well as to strobe the unit. So i used a spdt switch that has the center position being off. I can switch the ground signal between the black and white wire. All fasteners are stainless, which is nice. But there are captive stainless nuts that are stuck in the bottom track of the housing. I opted to not mount the light using them, so those nuts just slide back and forth. I gave the rating of 4 stars because of the odd wiring (switching the ground).
I was expecting these to be brighter based on other’s reviews. However, i am now waiting to have a little more spending money to buy a more expensive set. When testing in the garage, they look fine, but i can certainly see the difference when driving at night (not enough light output). Driving around the city with city lights and other cars around you should be ok (not fine, just ok), but i am not comfortable with these in a dark environment. Installation was a breeze – plug and play. The set came in well packaged and the housing seems to be made from quality materials that will last. I will not recommend for low-beam. I have not tested in hi-beam, but i suspect these are more suitable for fog lights than your everyday low-bean lights.
This bar is ridiculously bright. It literally lights up my entire neighborhood. I am using a mictuning wiring harness rated at 600w to run it. mictuning hd+ 12 gauge 600w led light bar wiring harness kit w/ 40amp relay, 3 free fuse, rocker switch blue(2 lead 12ft) i had to cut the pigtail off the light and wire it direct to the harness, but that was simple and requires very few tools or wiring knowledge. The harness the light comes with went straight to the trash. They send it with 18 awg style harness that just won’t carry anywhere near enough power for this bar to reach its full potential (technically mine won’t either, but it’s definitely better) the pigtail wires coming from the bar itself after i cut them turned out to be 14 awg which a few others had mentioned. As far as i can tell they are cree bulbs/chips as they look identical to my flashlights with cree stuff. I purchased some inexpensive mounts omotor 1999-2006 chevy silverado/gmc sierra steel metal upper roof windshield mounting brackets for 52 inch cuved led work light bar suv offroad. that fit my truck perfectly. I drive a 2004 chevy silverado 1500.
The h4/9003 just about fits my 2011 honda fit sport, and are much better quality than a thirteen dollar pair of no name leds from ebay. Autofeel’s is much more robust, brighter, better packaged, and with a more thoughtful approach to installation. Unlike the no names, the black plastic ring separates from the bulb with less force and allows the bulb to rotate into different positions. Two things really bothered me. First, the lack of instructions. No pictures, no diagrams, not even engrish directions are included in the package. Luckily, there are instructions with pictures on the amazon product page. Even then, i still had no idea how to properly orient the leds. I had to do some web searching and only then learned that the lights should be facing left and right with the shield facing down. Second, after installing the leds, a drl (daytime running light) warning lit up on my dashboard.
【NEW DESIGN】Simple design to reduce failure rate.
【AVIATION ALUMINUM】The overall use of custom-made of aviation aluminum alloy stamping, high temperature, anti-oxidation, anti-corrosion;
【COB CHIPS】Using a new generation of imported chips, colorless decline, instant response; penetrating power, no fear of rain and fog.
【SAFE AND SECURE】Built-in drive can be instantly activated, compared to the dim halogen lamp need start xenon lamp 3-4 seconds, our LED headlamps can be instantly highlighted in response to a variety of unexpected situations, such as suddenly into the tunnel rain and fog.