I like it and could not wait to install it however, after reading the reviews that it will fit a 2012 cadillac ctsv- it does not. I am sure if i want to cut around the light to make it fit i can and i believe people have. So please know it is not a plug and play with a 2012 ctsv 4 dr.
Looks great, but doesn’t fit the 2012 escalade. Tried it under the puddle lights on the side mirrors–no go; and tried the side door lights–no go. :(my recommendation to the seller would be to make some for the 3rd generation (i. 07-14) escalades and just be alittle more thorough with regards to compatibility when describing.
I wrestled with the idea of these blingy lights, but now that there in, i’m considering a pair for the back doors. Pretty easy to install with a screwdriver (i put duck tape on the tip, but probably didn’t need to). It came without instructions, but the seller has them posted. I popped them in early in the day and snapped these pics after opening the doors tonight. Pretty crisp caddy logo for that extra fashion pop that says; ‘i’m out’ or ‘i have arrived’.
I bought a set for our 2011 bmw 335i and they fit perfectly and the image was clear. But the set i purchased for our 2014 cadillac ats had some issues. First the door needed to be filed a bit, not a big deal but not super certain if the factory lights will sit in there tight anymore. (didn’t check) secondly the whole thing kept popping apart. When you push the connector in, that makes it want to pop apart. Lastly, the image was more hazy than the bmw lights which were ordered from the same manufacture at the same time. Though this may have been due to the fact they kept coming apart.
But only 4 stars because i have to cut my door panel light hole larger for it to fit my 2008 srx, and i’m not willing to make that kind of adjustment in a car i’m not finished paying for lol.
The product itself is reasonably good. However, there are absolutely no instructions. The lights require orientation. ) a simple marking on each light to properly install them would be tremendously helpful. Otherwise murphys’ law prevails. Of course i installed all four incorrectly. The electrical contacts were not properly aligned to match the connector. I installed four lights and had to monkey with the connector positions with a screwdriver on every one. Then of course i had to do it twice because of the orientation problem. The final result was good, the logo was sharp and clear and i was satisfied. It could have been so much easier if it resembled the normal packaging and instructions of an american made product.
- Best inexpensive upgrade for your Caddie
- These lights are Gen 2 using LED lights and won’t burn the emblems out.
- A little help with instructions please!!
The three stars is specifically because the lights work well once its plugged in. The image is clear and bright. However, it did not fit as a ‘plug-n-play’. You will need to alter the door trimming, and if you love your car, it’ll hurt your soul to do this. The prongs for these lights came unaligned and required me to use a needle-nose to straighten them out.
I bought this with no real hopes for a good result, but these things are pretty cool. Best $14 i could put in the car. And for anyone that wants to know, these will fit a 2013 ats. The attached photo is what you get at night.
These lights are gen 2 using led instead of the older heat lamps which erode the insignia over time. Now they are built slightly cheaper and definitely lighter than first gen. First gen you have to check which way they are oriented. There is a little nub on the side of the optical glass. To change the orientation of the symbol, just remove from door and using a small screwdriver push the nub to move the emblem. Now to address those who say it doesn’t fit. Two of my doors had the same issue.
Amazon screwed the pooch on this one. I was looking for trim for my cts and its specific tear and on the second page they slipped this in on me and i missed that it was for the wrong year. It wasnt worth the cost to send them back so they went to the trash.
Love the product and it was as advertised beautiful image as per the pictures and description but this item did not fit my 2011 cts the openning was too small for the item to fit in the factory opening, i will try another but plan to quiz the seller more on exact fit net before ordering next timepaul.
Features of Bailongju Easy Installation Car Door LED Logo Projector Ghost Shadow Lights compatible with cadillac 2-pc Set
- Make sure this fits
by entering your model number.
- Dedicated to the cadillac car,Installation is simple,Directly replace the original car door lights
- No drilling, no wiring, no disassemblying, no damage to your Car. Easy to install,It will only take you about 5 minutes.
- When the door is opened, the cadillac LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
- High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
- Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.
Make sure this fits
by entering your model number.
Had to reroute a door light and cut a hole in my 2004 sls worked like a charm and i get a lot of compliments. When people see it of course which is hardly ever.
Dedicated to the cadillac car,Installation is simple,Directly replace the original car door lights
No drilling, no wiring, no disassemblying, no damage to your Car.