I ordered this item to replace a broken plug on my old 12v compressor/inflator. With a bit of wire splicing and soldering, it turned out to be exactly what i needed. The stranded copper wire was exactly the same size as the wire on my old compressor, contributing to an easy repair. I have tested the compressor with the new plug, and it works like new.
Using it to power a 400w inverter in my truck although you have to be careful that you don’t pull more than 180-200 watts from a cigarette lighter connector. It has a very nice tight connection in the lighter socket which is important because loose connections mean excess heat/blown fuses/melted plastic.
I used this to replace the 12v male connector that came with my 400w inverter that i crushed with the truck door. Works great, came with 15a and 20a fuses.
Totally met and exceeded my expectations. Arrived on time and the quality was solid. Used it to repair the power leads on my 12v tire pump. I was dealing with a crappy plastic plug that had a crack in it. I enjoy using it again for my bikes and cars. This new motocity replacement is worth every penny for quality that should last.
I have a beefy car inverter with threaded posts. The old cable got frayed from being tossed around the pickup truck. This cable has circular lugs that fit on the brass posts just fine. Twist down the knobs and the connection is secure. Easy fix that saved the inverter from scrap.
Used this with a roypow power supply to bench test car amplifier.
- Don’t waste money/time on others
- This thing takes electricity from my car’s cigarette lighter port and delivers it to other stuff.
- Works on my 400W inverter
Bought to replace the factory plug that came on my portable food warmer. This plug has an led indicator along with a 15amp and 20amp fuse.
The quality was a lot more than i was expecting based on the price. Would purchase again if needed. The plastic was not exactly cheaper end.
The electricity always arrives hot and on time. Caution: if you’re using this to power a personal time travel device, be certain to read the entire instruction booklet carefully and make sure your undergarments meet the recommended minimum resistance rating.
I bought this to replace the power cord on the inverter that came with my desk for the passenger seat in my car. The old one was not nearly as well made as this one. Excellent fit and it does not wiggle loose in my vw cigarette lighter socket.
Had to splice and extend for it to work with my solar generator, but i did expect that since it was advertised as 1 meter. This was very easy to do and the quality is high. Came with an extra fuse as well, which is nice to have. Works great for what i needed and may buy more in the future as i build on my generator.
Features of Carviya 12V 24V Heavy Duty 16 AWG 15A 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 1 Meter 3.3 Feet Cable Wire For Car Inverter,Air Pump, Electric Cup
- Make sure this fits
by entering your model number.
- 16 AWG Heavy Duty Red & Black Copper Wire, Plug Shell Made by the Bakelite Material (phenolic plastic), Spring is Copper Material. Hardness, High Resistance, Arc Resistance, Heat Resistance. Phenolic Plastic is the ideal high-temperature electrical materials, the quality is far superior to plastic material.
- With green LED indicator light (about 2ma current almost no electricity); Built-in 15A glass fuse, and come with an extra 20A glass fuse to spare.
- This is a standard parts, apply to almost all models of cigarette lighter socket. Also can use other appliances with terminal. Line nose aperture is 6.3 mm.
- RVB 2 X 1.5 square red and black cable, red cord is positive, black cord is negative.
- Cigarette lighter plug already soldered with electric iron, plug and play. After cold nose pliers pressure line and then solder and welded, robust and reliable, and never fall off.
Make sure this fits
by entering your model number.
I cut the ends and created my own harness for a custom install. The quality is good and even includes an extra in line fuse. It does not feel cheap in your hand and is built sturdy with screws holding the assembly together.
It almost surely can handle more current than your vehicle’s lighter socket can supply, and may well last longer than the vehicle that socket is in. I spent over a decade working with automotive electronics. I have probably seen at least a thousand different lighter plug designs, so that headline really means something.
This cord has held up as a connector to a 12v ac converter we use in our car on trips to charge my laptop. I ordered the first cable from a radio supply store. It shorted, melted and blew a fuse on first use. It fell apart with the essential inner core pieces lost to the car vacuum i assume. The third is this unit which seems to be of high quality and has withstood a long trip already.
After purchasing a less expensive same type of product on amazon and having it fail in minutes, i bought this product. Although a few dollars more, i highly recommend spending the extra money. I use it now primarily to illuminate led bulbs which i install into housings prior to permanently installing into automotive vehicles. I know this is not ‘heavy lifting’, but my original purchase couldn’t even deal with that. Judging by the quality of the material, and just the feel of this product in the hand, i would have no worries about using it for powering heavier 12v powered equipment. Just as a comparison, the first one purchased came with one 2a fuse installed and 2 1/2′ leads. More than enough for my application, but it failed as i said in minutes. This came with a 15a (widely available) fuse installed, an additional spare 20a fuse, and 38′ 1.
I spliced this into an existing 12v tire inflator which had the plug-in adapter smashed into pieces and this worked really well.
I used this to fix a coleman electric cooler. The original cigarette lighter plug failed, and of course, it was an ’emergency’, so i used an inexpensive radio shack plug. It lasted a year, but the + pin failed. I replaced it with this, which has heavier gauge wires and a solid ‘+’ pin. I tested it for 24 hours, and the solid pin stayed cool (higher conductivity) than the stamped pin on the radio shack unit.
16 AWG Heavy Duty Red & Black Copper Wire, Plug Shell Made by the Bakelite Material (phenolic plastic), Spring is Copper Material. Hardness, High Resistance, Arc Resistance, Heat Resistance.
I cut the ends off me used bullet connectors. I ordered two of these and both came with an extra fuse. I used mine for a cb radio in each car.
With green LED indicator light (about 2ma current almost no electricity); Built-in 15A glass fuse, and come with an extra 20A glass fuse to spare.