Easy installation and perfect illumination.
These little lights put out a lot of light with very little amp draw. Very easy to install and they look great.
They are good should do the job.
Perfect replacement light for our trailer. Took 5 mins to install and connect the wiring.
However i planned on using one for each of my two trailers. Two were necessary for one fo illuminate.
I put these on my 1999 ram 2500 for license plate lights, and they worked great. Ordered 2 more for other trucks.
- A good light for small projects
- Great led lights
- They are pretty bright for 3 LED fixtures
But i am going to buy more soon. I think they will work great.
Nice, low profile application.
Shipped and arrive fast and on time. I replaced my factory tag lights w/ these led black case lights on my 2011 gmc serria pickup. They are fairly bright but not as bright as i hoped. Make sure you have a good solid ground to the lights or they will be very dim or not work at all. Hope they last through my needs.
Excellent lights for the money.
Use them for my inside dome lights had to take them apart cut the black plastic back resealed it back. Now i have nice bright lights in the truck. Works of the switch under the lights.
Features of FXC 2x Car LED License Plate Tag Light 12V or Convenience Courtesy Door Step Lamp
- Make sure this fits
by entering your model number.
- Universal Fit for all cars, trucks, trailers, & RV’s with 12V.
- 3LED each light.Street Legal Xenon White LED Light.
- Waterproof, DOT approved.
- Package Includes: 2x lights , 4x screws,Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.
- Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question.
Make sure this fits
by entering your model number.
Super bright and easy to install i put them on my 1993 dodge w250 fit perfect.
These were ok for the price. The first one i mounted broke due to the size of the screws it came with. I drilled the holes on the second one but the glue seperated and it came apart. Some silicone fixed it and it mounted fine. It works but i don’t think i would buy again.
White led output, but hardly bright. Sufficient for a trailer license plate. Second light destined for small cargo bay for trailerproduct ‘dimensions’ are for the box containing two (2) lights, not the units themselves (small). 5′ (mounting holes are 2′ center-center), top-bottom 1. Ample wire for hookup (8′), wires exit via centered hole in back, thin foam backing does not appear weather proof. Supplied 4 screws are for wood, not metal, and typical of rusting.
Work well and don’t take a lot of space.
Great option for a universal license plate light. Nice a bright and easy to install, even came with hardware.
I bought these for a small electronic project which needed a nicely packaged light mounted at a 90 degree angle to a vertical surface. Each license plate tag light draws 13. 6 ma at 12 volts or roughly 0. 16 watts per light assembly. There is also a foam gasket on the back, which is 0. The actual light housing is 1. 2′ tall (including the foam gasket and base) x 1. The countersunk mounting holes are roughly 0. The insulated wire has 16 strands of 5 mil copper wire (roughly 24 awg). The housing appears to be water tight. The hole where the wires enter appears to be sealed with clear silicon rubber compound. Each light comes with two countersunk sheet metal screws (0.
Universal Fit for all cars, trucks, trailers, & RV’s with 12V.
Delivered on time and as advertised. Was hoping to be a little brighter but will work fine for the job i needed them for.
These were easy to install as replacements in a travel trailer. Brighter than the originals and no bulbs to go bad. Seems more durable too since the is no need to open it to relace the bub so it is more solid.
Not as bright as the ones they replaced. I wish i knew how to order brighter.
Work great look nice kinda bright but not too bright also i use one as a porch light for our camper they are plastic but don’t break easily.
Bought these to put on my truck, after a while i sold the truck and kept the lights. I should come with hardware to install it with other than that i can’t complain.
But overall, lighting is good. Bought these to replace license plates lights on an aftermarket bumper.
3LED each light.Street Legal Xenon White LED Light.
Nice to have new light on my step. Just the right amount of light.
After initially having some problems with my original order of these lights, i was immediately contacted by purishion the maker of these lights. They apologized for the issue and replaced the lights with two new ones free of charge. The new lights are bright and working properly; much better than the stock license plate light they replaced. They are very easy to install and have a clean oem look to them. I am very pleased with both the product and the wonderful customer service.
They are pretty bright for 3 led fixtures. However they were a pain to make work. Have never seen 12 vdc fixtures that are polarity sensitive. On top of that the white led must be the ground/neutral and the black is the 12 vdc/hot. Normally/usa the black wire is a ground circuit. They will only work wired in this manner.
One of the lights has a led rumbling around inside. Visibly missing one led, causing only one row of three led’s to light up. Should have two rows of led’s lit. The other light works as expected. Not very bright, but probably enough to be replacement for tag lights.
Waterproof, DOT approved.
Package Includes: 2x lights , 4x screws,Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.