Klein Tools Screwdriver and Nut Driver 11-in-1 Multi Tool, Great “go-to” screwdriver.

Solid, fits well in the pocket and there when you need it. There are better multi screwdrivers on the market but for the price this one is very hard to beat. The nut drivers are invaluable when working with over torqued screws on breakers and old screws that have been stripped from years of abuse. My only gripe is that the bits tend to loosen up over time and are expensive to replace ($20 for a four pack). Rubber handle holds up compared to other expensive over-molded plastic handled screwdrivers that break down when exposed to solvents.

This is an excellent choice if you have limited space, or don’t want to carry bunch of drivers. It fits nicely in the side pocket of carpenter pants, and is my go-to screwdriver. The tips are easy to switch around, and the over-grip is a bit softer than most other klein screwdrivers. It’s very comfortable to use. There are some negatives to this type of driver (including all brands). First, the bits can easily be lost, and are not easy to replace, so be careful if you are up on a ladder or working with machines. The tips will also not reach screws that are deeply recessed. For those situations, a standalone screwdriver is best. To be honest, i prefer a magnetic driver with insert bits (klein 32510 is excellent, but only sold with a security bit set), but this is a good choice since everything is self contained. If i need to make a service run, this goes with me.

This screwdriver has all the critical bits and drivers all in one. Compact and the grip feels comfortable in your hands. Ph1ph2#1 square#2 square#1 flathead#2 flathead3/8′ nut driver5/16′ nut driver1/4′ nut drivert10 torxt15 torxtheres a spring loaded ball that keeps the bits in place.

I am never without this tool in my pocket or in my hand. It’s a must haveonce they start putting a beeper in the handle that goes off when i walk too far away then i’ll give it a 5 star. And yes i’d buy it if they had one lbvs. Im on my 2nd one due to my own forgetfulness. Cheaper then at the tool house so i bought my replacement one on here. It’s one of my most used hand tools.

I’ve had several of these, and all of them i have somehow managed to strip the nut driver part out. I was loosening some small headed bolts on an electric motor, and stripped it out. I didn’t think i was putting much pressure on it at all, but it’s happened several times. The frustrating part is, once it’s stripped out, the screw driver tips won’t fit back into the shaft like they should. I’ve always been a huge klein fan, but i think next time, i’ll try another brand and see if they hold up any better.

My go to screwdriver that could replace my entire screwdriver set. Electricians be warned when working in a hot panel. The bits can easily drop out of the screwdriver after the wear of changing bits often. Had a couple close calls but never accidental arcs. Other than that this is the first and sometimes only screwdriver i grab when i’m not sure what i’m up against for screw types.

Com/gp/product/b0015sbilg/ref=oh_aui_detailpage_o09_s00?ie=utf8&psc=1first and foremost. I am a huge fan and every day user of klein tools. Working in the industrial automation/electrical field is demanding and warrants the use of quality tools. Finding another tool that matches or even comes close to the quality offered by klein would be difficult. You might even call me a fan-boy. I however like to be fair and give proper ratings to products i have purchased as i hope my investments can help the next person make a well informed decision. The 11-in-1 multi-tool by klein deserves every bit of ✰✰✰✰✰ 5 stars.

Key specs for Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500:

  • Make sure this fits
    by entering your model number.
  • Integrated screwdriver and nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess
  • Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
  • Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
  • Blast finish bit tips provide a firm hold and reduce cam-out; Search Cat. No. 32526 for a full set of replacement bits
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

Comments from buyers

“Klein tools is a big yes., ✰✰✰✰✰ Quality – Rugged – Dependability ✰✰✰✰✰, Not bad for a multi-tool.”

The king of screwdrivers without a doubt. Klein tools are known for high quality tools and this tool is no different. I’ve used it day in and out for a year now. The grip feels amazing in your hand and you always have what bit you need right on hand. If i ever lose this screwdriver (let’s hope i don’t) i’ll be buying another one asap. It’s always up front and center in my tool bag and that’s for a good reason (it’s amazing). It’s high quality made, comfortable, easy to change out bits and will last you a lifetime. This it the type of tool that you can hand down to your grandchildren one day.

Klein tools screw drivers are a go to. This is a great example of a single tool that reduces what you have to carry. It’s got a bit more weight than a ‘normal’ phillips or torx or. This and the  stubby version  are must have’s in any tool box (or keep them in your truck for those unexpected needs. ) the bits are solid do a good job of not stripping the screw head and i’ve bought three of these because i lost one, and one was stolen by a 4 year old while assembling his sisters bed. I’ll get that one back next time i’m at the sister-in laws.

I think klein tools have gone down-hill in terms of quality. I like this screwdriver because it has a nice feel to it and has all the bits and drivers i need as an electrician, but the detents on the bits are too weak, causing them to fall out when you pull back if the driver is even slightly bound up in the screw. In addition, the steel for the square drive seems really soft, it was visibly work after only a few weeks.

First, klein tools are outstanding. When i buy screwdrivers, i always select klein. Remember, you get what you pay for. I have a 10 in 1, and i wanted a second, so i just purchased this one. Hey, a third size nut driver. Anyway, for people concerned with the bits not being magnetized, there is a simple trick that i use. First i switch to single tip bits. (you can buy them on amazon. Wiha is a good choice) then, get yourself some ‘hobby’ super strong rare earth magnet discs, 1/4 inch size.

On a construction site you’ll probably see more klein 11-in-1 drivers than any other single screwdriver. They’re incredibly handy and have all the common tips, including 1/4, 5/16 and 3/8 nutdriver sizes. One screwdriver in your pouch and you’re ready for almost any screw you come across. I find klein handles extremely ergonomic to use. This is a great screwdriver to carry around. Only downside is its a little heavy due to all the tips and such, but better than lugging around 6 different screwdrivers.

I love klein products, so when i heard about this i was excited. I ordered it, took it on my first job, had no issues so i was in love. Then for some reason, whenever i went to pull back my driver, my bit was either still in the screw, or on the ground. They need to fix this issue, because i have already lost 4 screwdriver heads. Great grip, quality feel, all they need is a deep indent in the tip or something to keep the bits from slipping out.

I’m not a huge fan of multi tools, but needed one for motor and generator class. This is my first klein product and so far i’m happy with it. It feels strong and the bits feel secure. I’m sure over time they will loosen up, but for now they feel very secure. Overall i think i’ll be happy with this screwdriver. Update: i’m actually loving this screwdriver. Putting it through small tasks and it’s very solid feeling.

Summary
Review Date
Reviewed Item
Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500
Rating
4 of 5 stars, based on 1,092 reviews