MICTUNING License Plate Mounting Bracket : Thin metal. Good lights.

Not what i expected for the money. Light bar is better than expected, lights are a lot brighter than expected. I honestly was expecting not what i got. If life expectancy is low i will notate my review. But i can say i would buy again and definitely recommend this bundled light bar and lights.

I like it i can see on and off road. Nice and bright no vibrations on the trails i can see the edges very well on the hills.

The black powder coating has a nice finish to it. The bracket has several mounting points to fit different sized licence plates. However, in my particular case, i own a 2015 mazda5, and i had to dismount the bumper cover and the foam thing that comes next and weld 2 nuts. This because the front licence plate has only 2 very small self-tappers that hold themselves to the foam.

Lights have been working really well. No noticeable leaks and been driving through a few rainstorms. They throw white light far but aren’t street legal in california. The mount is really really thin aluminum. Think aluminum can thickness. It’s holding up well on the truck now, but don’t get it close to hitting anything like a bird or hail.

It fits right in where my license plate mounts. Paint fades and peels sadly.

Nice alternative to a spendy ‘bull bar’ adds something new to the front of my jeep. No instructions on how to put the lights on. But was able to finally figure it out.

I used the mictuning wiring harness that is purchased separately.

Seems to be working fine for now.

  • Fairly easy install / looks nice
  • I would buy again if i had another car.
  • Good looking light bar mount

MICTUNING License Plate Mounting Bracket with 2PCS 18W LED Work Light Pods Universal Fit Front Bull Bar Bumper Bracket Holder

  • Make sure this fits
    by entering your model number.
  • Upgraded Customized Design. Specially designed for our Valued customers who are looking to mount lights on their vehicles with no convenient mounting locations of the license plate
  • Don’t have to pay extra for lights! The kit comes with 2 pieces 18W (total of 36W, 1260LM, cool white) bull bar style light bars, great for driving light, DRL, work light, etc
  • Heavy Duty & Universal Fitment. Aluminium alloy, nicely powder coat black finish, 0.12” thickness heavy duty design. Fits most Car, Jeep, Truck, Pickup, SUV, 4×4, etc
  • Easy installation. No drill, No modification required, just like replace a license plate using its mount location, usually install in 20 mins
  • What you get: 1 of universal license plate mounting bracket (includes 2pcs 18W lights), 1 Yr MICTUNING Worry-Free Warranty and our Friendly Customer Service

Frame is too wide for 2016 jk. This required cutting the frame several inches to fit between the molded fog lights on the bumper. The mount is then secured only by your liscence plate screws which are only in plastic. This mounting is inadequate to be secure and wouldn’t last if you ever use an automatic car wash.

Good little light bracket i put it on the wifes durango.

It came with no instructions (if it had i’d give it five stars), but the parts are pretty straight forward. I did have to drill the plate holes on the jeep a little bigger to receive the bolts that came with this. I purchased the wiring and will install in a few days. Overall, easy to install and looks good on my partiot. It’s defiantly a less expensive alternative to having the deaker install fog lights into the spaces on the jeep they’d normally go. And this took me less than 15 minutes to install after i hooked up the lights to the bar.

Nice black finish, with logo etched into the metal. Lights were easy to wire (1 black 1 red). I was surprised with how light the bull bar isits made out of aluminum i think.

It took some time to put it together but i finished it and looks real good on my ford sport trac.

I decided to purchase one of these bars after my son put one on his truck. The mounting bar is light and not really heavy duty, but it serves it purpose just fine. Be sure you are mounting it into metal, not just a plastic license plate holder. I did not mount the lights yet because i need to order a wiring harness so i can’t really say much about those. It would be nice if they included the wiring, switch and relay, but for the price i’m not complaining.

Decided to try this out to get my led pods out from behind my grille,i have two square 18w tractor supply lights on instead of the pods that came with it cause they didn’t seem bright enough maybe for back up or loading lights and there enough room for two pods and a mini 7in light bar,kinda flimsy but could be where i mounted it to on my bumper where my license plate originally was mounted to,so far so good tho it’s been thru a tunnel car wash and hasn’t broken or moved and soon to be taken off-road.

I was plesently suprised by this set. Where i was expecting plastic, i got solid metal, including the lights. There is a logo laser etched into the powder coating that i wasn’t too happy about. Make sure you get a wiring harness, as this set does not include one.

Summary
Review Date
Reviewed Item
MICTUNING License Plate Mounting Bracket with 2PCS 18W LED Work Light Pods Universal Fit Front Bull Bar Bumper Bracket Holder
Rating
3 of 5 stars, based on 43 reviews